Building a quadcopter

One of the most frustrating things for me in building my earlier quads was finding a good place to mount the FPV antenna. Back then, designers and manufacturers didn’t really care about including some design features to mount antennas, and as a result, I must have broken tons of antennas and transmitters. Nowadays many frame […]

I’m really excited to share my ZMR 180 mini quadcopter build with you. Originally, I started out with a ZMR 250, but I wanted to get something smaller, too, which I could fly in tighter spaces. Living in India, there are not as many open spaces to fly, but I do have access to some […]

The Betaflight F3 flight controller was developed by FPV Model in conjunction with Boris B., the brains behind Betaflight. The really unique thing about the Betaflight F3 board is that it is designed specifically to be able to use all of Betaflight’s awesome features. Let’s get this Betaflight F3 review started! Feature overview For miniquads, […]

The most important part of your quadcopter is your motors. You can have the best flight controller and ESCs in the world, but when it comes to flying, your motors will actually be spinning your props. And if you pair a 4S lipo with motors that can’t handle the voltage, you’ll be seeing some magic smoke […]

So you’re thinking of getting a Tiny Whoop – or you already have an Inductrix, an Eachine E010, or something similar, and want to turn it into a monster? You’ve come to the right place. This is a list of parts and upgrades for your Tiny Whoop, categorized. Of course there are tons of aftermarket […]

    Updated Dec 2018 Ahh, micros! Less than 250 grams, no need to register them if you are in the USA, and customizable to the point of being a docile indoor quad or a mighty screamer that will give a 5 inch quad a run for its money. Last year, I had written a post […]

As far as flight controller softwares go in the miniquad world, the kings are Betaflight, KISS, Raceflight(now known as FlightOne), and the new kid on the block is Butterflight. Betaflight, KISS, and Raceflight dominate the market share, though, since Butterflight is still up and coming. There is a hot debate – or a matter of […]

The Armattan Rooster is Armattan’s follow up to the very well received and much favorite Armattan Chameleon. If you want to know how good the Chameleon was, check out Joshua Bardwell’s and UAVFutures‘ raving reviews of it. The Rooster and Chameleon are really unique designs that make it really ideal for freestyling. They’re relatively lightweight, […]

To build a really nice and clean fpv miniquad, a power distribution board really helps in cleaning up the wiring. Back in the early days of building miniquads, wiring could get quite messy. You would have to use a really funky looking PDB, or build a wiring harness. Essentially, the process of wiring up ESCs […]